Factory Direct High Quality Car Paint Spray Booth for Sale

Product Description

Product Description

Full Down Draft Spray Booth

1. Spray booth is used for painting cars and light trucks.

2. The dimension can be customized according to the client's request.

3. All parts related with electricity are from famous brand in China.

4. Heating system: diesel burner, electric infrared heating and gas burner heating system are optional.

5. Power supply: 380V, 3 phase, 50Hz; 220V, 3 phase, 60Hz; or 415V, 3 phase, 50Hz

Outside Size:(mm)	7000*4000*3300	Front Door:(mm)	2800*2550
Inside Size:(mm)	6900*3900*2600	Total Power:(KW)	12kw for diesel/gas burner; 36kw for infrared heating
Wall Panel:	EPS colorful steel skin panel, 50mm thick; steel plate thickness 0.376mm; tongue&groove style, anti-flame and heat-insulation.
Basement:	Galvanized steel sheet and square steel pipe assembling, 2 rows of grid plates made by flat bar and round steel; 3 rows of diamond plates, galvanized; 2 rows of ramps.
Intake Fans:	Two sets of 3kw fan for intaking air, air capacity 20000mm3/h
Exhaust Fans:	One set of 4kw fan for exhausting air, air capacity 12500mm3/h
Purification system	Pre-filter,600G high efficiency filter(ceiling filter),floor filter(fiberglass filter).
Heating System (diesel burner or infrared heating for optional)	Italy Riello G20 Diesel Burner, 200000Kcal/h. Stainless steel heat exchanger ,argon arcwelding. Auto-damper for changing spraying and baking.
	Italy Riello FS20 Gas Burner, 200000Kcal/h. Stainless steel heat exchanger ,argon arcwelding. Auto-damper for changing spraying and baking.
	Infrared heating system, 3-tubes/unit, totally 8 hating units, 24kw.
Lighting System	For Diesel/Gas Burner heating system: Ceiling Lights: 8Units×4Pcs=32Pcs×36W. Side Lights: 6Units×4Pcs=24Pcs×30W
	For Infrared heating system:Ceiling Lights: 8Units×4Pcs=32Pcs×36W.
Controlling system	Power switch,spray/baking switch,light switch,emergency stop,etc.

Details Images

Basement floor

Intake and Exhaust system

Purification system:

Galvanized steel sheet and square steel pipe 
assembling, 2 rows of grid plates made by falt 
bar and round steel. 3 rows of diamond 
plates.

Two sets of 3kw fans for intaking air, air 
capacity 20000m3/h 

One set of 4kw fan for exhausting air, air capacity 12500m3/h

Pre-filter,  filtering rate > 83%                                      600G high efficiency ceiling filter, filtering rate > 97%                                                                     

Floor filter(fiberglass filter), filtering rate > 70%

Belimo Electric Damper

Please enter the title here

Heating System

• Air damper size up to approx. 2 m²

• Torque motor 10 Nm
• Nominal voltage AC/DC 24 V
• Control Open/close, 3-point

Delixi Brand electric parts, power switch,spray/baking switch,light switch, timer, temperature setup, emergency stop,etc.

Italy Riello Diesel/FS20 Gas Burner, 200000Kcal/h. 
Stainless Steel Heat exchanger, argon arc welding. Auto- damper for changing spraying and baking.

Packing & Delivery

Company Profile

Comapny Introduction

Yantai Winner Electronic&Mechanical Technology, Co., Ltd, focus on providing complete equipment solution for car maintenance and repairing workshop. Now our main products are car spray booth, car body collision bench, truck/cab repair bench, car lift, spray/paint booth, wheel alignment, welding machine, hose reels, etc. Our products are used in many 4S workshop all over the world.With over 10 years' rich experience, we manufacture, we select, we collect. We always are ready to listen, to make solution according to our client's special requirements and supply equipment with good quality but reasonable prices.

Application Scenarios

FAQ

Q. What should I expect from a new spray booth?
A. Filtration: Quality finishes require clean contaminate-free air which is accomplished by proper air filters. Prior to air
entering the booth, YANTAI WINNER uses pre-filters to capture large particles and debris, and high-efficiency intake filters to filter out any remaining dirt and dust particles. The air is filtered again before it is recirculated or exhausted from the booth.
Airflow: Proper airflow in the booth is accomplished by creating a flow of air that envelops the vehicle during booth operation.
This airflow is responsible for carrying away paint overspray during the refinish process, and air movement during paint curing.
Lighting: Another key element is bright, shadow-free lighting throughout the booth. YANTAI WINNER utilizes color-corrected light.
fixtures, in the proper quantity and correct location. This creates an environment that allows for proper color match and paint flow identification.
 
Q. How do you control your quality?
A. Our factory is ISO certified. We have our own QA and QC team. They will check on site and finished products to ensure alldetails to meet our highest standard and the customer's requirements.
 
Q. What is your payment terms?
A. We accept T/T, L/C, Western Union, etc.
 
Q. How long is your lead time?
A. For stock or regular products, our lead time is 7 to 15 days. For custom-made products, our lead time is 20 to 30 days.
 
Q. What is your warranty?
A. Our warranty is 13 months. Parts have free replacement excluding artificial damage in Warranty. We will also stock spare parts as long as one equipment of this type is running in the world.
 
Q. How about visiting your company?
A. We welcome your visit at any time. Our factory locates in Shandong province in the east China.